S530 Leak

กรกฎาคม 14, 2016 by admin in SUTO iTEC (CS iTEC) | Leave a comment

SUTO-iTEC leak detector S 530

Leaks in compressed air systems can cause thousands of Euro losses. The detection of leaks is an important maintenance requirement which traditionally can be done by soap water, but now by an US detector like S 530.

When gases are leaking through tubes and tanks an ultrasonic sound is produced which can be detected by S 530 even from several meter distance.
S 530 transforms these inaudible signals into a frequency which can be easily heard by using the supplied noise isolated headset. The integrated laser pointer helps to spot the leak from distance. In unpressurized systems an ultrasonic tone generator can be used whose sound will leak through small openings.

Application

  • Leak detection in compressed air, refrigerants, simply of any gas!
  • Insulation test of doors and windows
  • Detection of partial electrical discharges causing damages on insulations

Product features

  • Leak detection in compressed air, refrigerants, simply of any gas
  • Insulation test of doors and windows
  • Detection of partial electrical discharges causing damages on insulations

Technical data

Operating frequency 40 kHz ±2 kHz
Plugs 1) 4 pole connector shared by headphone and battery charger
2) 3.5mm stereo phone jack for sensor or sensor cable connection
Display 3 color black-mask LCD, 10 level
LASER pointer 640 … 660 nm wavelength
0.4…0.5mW output power
Power supply Internal NiMH rechargeable battery
Operating time about 6 hours without LASER pointer on
about 4 hours with LASER pointer on
Charging time around 1.5 hour
Charging operation temp +10 ºC to + 45 ºC(recommended)
Operating temperature: 0 ºC to + 40 ºC
Storage temperature -10 ºC to + 50 ºC
Weight 2.5 kg (full set)
Transport temperature -20 … +50 ºC
Performance chart
It shows the detection distance of various hole diameters at different pressures (lab environment).
Pressure / diameter 0.1 mm 0.2 mm 0.5 mm
0.5 bar 2 m 2 m 10 m
5.0 bar 8 m 14 m

ใส่ความเห็น