SUTO-iTEC flow sensor S 430
The sensor features long term stability , wide turn-down ratio and good temperature stability. It can be used in compressed air and non-corrosive gases.
Through a 1/2” G-type ball valve the sensor can be inserted into the pipe under pressure.
Various output signals allow the sensor to be connected to SUTO-iTEC displays and/or third party displays and PLCs.
Application
S 430 measures:
– Standard flow and consumption
– Actual velocity
– Pressure
– Temperature
– Standard flow and consumption
– Actual velocity
– Pressure
– Temperature
Product features
- Flow and consumption measurement in wet air or high mass flow / velocity applications
- Measurement at compressor outlet possible
- Tube diameters of 1’’ to 10’’. Other diameters on request
- Insertion type, easy installation under pressure through ball valve possible
- High temperature applications up to 200 °C
- No mechanical wear parts
- All parts which are in contact with flow medium are made of stainless steel
Technical data
| Flow range | Refer to Instruction Manual |
| Pressure range | 0 … 1.6 MPa |
| Temperature range | -40 … +200 ºC |
| Accuracy | Flow: 0.5 % F.S. Pressure: 0.5 % F.S. Temperature: 0.5 °C |
| Pipe diameters | DN 25 (1”) up DN 250 (10″) |
| Reference conditions | Programmable, default P =1000 hPa, T = 20 °C |
| Medium | Wet and dry air and non-corrosive gases |
| Output signals | SDI (SUTO-iTEC specific) 4 … 20 mA and Pulse (optional) Modbus/RTU (optional) MBUS (optional) |
| Medium temp. | -40 °C … +200 ºC |
| Ambient temp. | -20 °C … +60 ºC |
| Operating pressure | 0 … 1.6 MPa |
| Power supply | 24 VDC, 150 mA |
| Display option | 2.4” color graphics display with keypad |
| Process connection | 1/2” G type |