Flow / Consumption Accessories
Useful accessories for installation and operation of flow sensors
| Accessories | Order No. | Description | Application |
 |
C190 0002 | Closing cap for S 420 / S 450 material: 1.4404 | To close the measuring sections in case the sensor unit is removed. |
 |
C190 0060 | Thread adapter, G1/2″ internal to PT1/2″ external, SUS303 | Used to adapt S 400 or S 450 to a PT thread ball valve. |
 |
C190 0065 | Thread adapter, G1/2″ internal to NPT1/2″ external, SUS303 | Used to adapt S 400 or S 450 to a NPT thread ball valve. |
 |
C190 0116 | Flow conditioner | Wafer type flow conditioners, which is flanged between two flanges 5 – 8 times diameter upstream of the flow meter. Please specify nominal pipe diameter and pressure. |
 |
A530 1105 A530 1106 A530 1111 A530 1113 |
High pressure installation device. To be used for pressure > 1.5 MPa | For safety reasons we recommend to use this installation device whenever the operating pressure exceeds 1.5 MPa * 0530 1105 – High pressure installation device for S 400-220mm * 0530 1106 – High pressure installation device for S 450-220mm * 0530 1111 – High pressure installation device for S 400-400mm * 0530 1113 – High pressure installation device for S 450-400mm |
 |
A530 1108 | SUTO-iTEC spot drilling device | This drilling tool is used to drill holes into compressed air pipes under pressure through a ball valve. |
  |
A553 0121 | Sensor cable, 6 pole, AWG22, 7.5 mm outer diameter, w/ shielding, black (per meter) | Sensor cable for S 450 sensor, US flow meter and power meter |
|
A553 0122 | Sensor cable, 5 pole, AWG24, 5.0 mm outer diameter, black (per meter) | Standard sensor cable for flow and dew point sensors |
|
A553 0123 | RS-485 cable 3 pole with shielding, AWG 24 | RS-485 connection cable |
 |
A553 0104 | Sensor cable 5 m, with M12 connector, open wires. | Cable can be used to connect SUTO-iTEC sensors to a PLC or power supply. |
 |
A553 0105 | Sensor cable 10 m, with M12 connector, open wires | Cable can be used to connect SUTO-iTEC sensors to a PLC or power supply. |
 |
A554 0007 | Power supply wall mountable, input: 85…264 VAC, output: 24 VDC, 15W, without cable | This power supply is used to supply 24 DC to sensors and other devices. |
 |
A554 0008 | 1/2″ G type ball valve | This is a proper ball valve for the instllations of flow sensors S 400. |
 |
A554 0009 | Wall thickness meter | The instrument is used to measure the wall thickness of pipes. The experience shows, too often the inner diameter of pipes is not exactly known, but is significant for an accurate flow measurement. By measuring the wall thickness and the pipe size the exact inner diameter can be calculated. |
 |
A554 0107 | Mains unit 100-240 VAC / 24 VDC, 0.5A for S 200 series, 2 m cable | Simple power supply for a portable S 420 or S 400 solution. |
 |
A554 2005 | Service kit for sensor configuration including software | This service kit can be used for all SUTO-iTEC sensors to change settings and check sensors. |